RESEARCH ARTICLE


Effect of Mix Proportions on Rheological and Hardened Properties of Composite Cement Pastes



Mohammed Sonebi*, Denis McKendry
1 School of Planning, Architecture and Civil Engineering, Queen’s University Belfast, Belfast, Northern Ireland, UK.


Article Metrics

CrossRef Citations:
7
Total Statistics:

Full-Text HTML Views: 937
Abstract HTML Views: 1873
PDF Downloads: 834
Total Views/Downloads: 3644
Unique Statistics:

Full-Text HTML Views: 473
Abstract HTML Views: 1054
PDF Downloads: 509
Total Views/Downloads: 2036



Creative Commons License
© Sonebi and McKendry

open-access license: This is an open access article licensed under the terms of the Creative Commons Attribution-Non-Commercial 4.0 International Public License (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/legalcode), which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.

* Address correspondence to this author at the School of Planning, Architecture and Civil Engineering, Queen’s University Belfast, Belfast, Northern Ireland, UK. Tel: 442890 974013; Fax: 442890 663754; E-mail:m.sonebi@qub.ac.uk


Abstract

There is an increasing need to identify the effect of mix composition on the rheological properties of composite cement pastes using simple tests to determine the fluidity, the cohesion and other mechanical properties of grouting applications such as compressive strength. This paper reviews statistical models developed using a fractional factorial design which was carried out to model the influence of key parameters on properties affecting the performance of composite cement paste. Such responses of fluidity included mini-slump, flow time using Marsh cone and cohesion measured by Lombardi plate meter and unit weight, and compressive strength at 3 d, 7 d and 28 d. The models are valid for mixes with 0.35 to 0.42 water-to-binder ratio (W/B), 10% to 40% of pulverised fuel ash (PFA) as replacement of cement by mass, 0.02 to 0.06% of viscosity enhancer admixture (VEA), by mass of binder, and 0.3 to 1.2% of superplasticizer (SP), by mass of binder. The derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of composite cement paste are presented. Such parameters can be useful to reduce the test protocol needed for proportioning of composite cement paste. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods which are highlighted. The multi parametric optimization is used in order to establish isoresponses for a desirability function of cement composite paste. Results indicate that the replacement of cement by PFA is compromising the early compressive strength and up 26%, the desirability function decreased.

Keywords: Compressive strength, Mini-slump, Plate cohesion meter.